Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2017 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

question oncrankshaft pully bolt 900 1993

posted by  mush on  Tue Jun 23 00:55 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 31 10:29 CST 2013
[RELATED]

does anyone have info on tightening the bolt on the crank, i over tightened the bolt on the last tightening it should be 90 deg. , and i thrned to 120 deg. can i dack it to 60 deg. or should i start over ??? thanks, rich








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    question oncrankshaft pully bolt 900 1993

    uid 18083's pic
    posted by  lucid on  Tue Jun 23 01:43 CST 2009
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 12:31 CST 2014
    [RELATED]

    The correct torque spec is:

    Stage 1 44 ftlbs

    Stage 2 an additional 60° rotation (Bentley's 90° is wrong)

    I think you should loosen and start over.
    --
    Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.