Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2009 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need help wiring in OEM volt meter 700 1987

Hi folks,

A fellow Brickboarder was kind enough to send me a turbo volt meter for my N/A 740GLE. I have the gauge physically installed, but I cannot find the V+ and V- terminals he has referred to in his brief directions to me. He is currently unavailable and my instrument cluster is still removed. I would be grateful for any help in understanding where I attach this gauge.

Thanks!

Ari








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need help wiring in OEM volt meter 700 1987

If memory serves, back of cluster. 3 screws side by side. Should be stamped on the cluster for ground (-) and +
--
Post Back. That's whats makes this forum work.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need help wiring in OEM volt meter 700 1987

I saw that - down at the bottom, near a connector. I thought the label was for the connector, not the 3 screws... but hey, I'll try it. Thanks!

Ari








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need help wiring in OEM volt meter 700 1987

Ari,

Any key switched 12v source and any convenient ground point will do just fine.

--
Mr. Shannon DeWolfe -- I've taken to using mister because my name misleads folks on the WWW. I am a 53 year old fat man. ;-)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.