Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Overdrive solenoid bolts. 200

posted by  someone claiming to be solaris on  Tue Nov 25 08:05 CST 2008 [RELATED]

So I'm half way through removing the overdrive solenoid. Dropped the transmission crossmember for better access. Problem is one of the 12mm bolts is so rusted it really didn't take much to round it off (lots of PB Blaster used). So I'm thinking I might need a damaged bolt and nut remover set from sears. Will this work. I'm starting to lose it. Help!!!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Overdrive solenoid bolts. 200

    posted by  someone claiming to be solaris on  Tue Nov 25 08:29 CST 2008 [RELATED]

    Box end which I heated and bent slightly.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Overdrive solenoid bolts. 200

    posted by  rstarkie on  Tue Nov 25 08:08 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:14 CST 2014
    [RELATED]

    Are you using a six point socket or box end? Something with a tendency to be difficult will only be compounded by using a twelve point tool.

    Randy







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.