Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Swap '83 Hall Sensor for '88? 200 1983

posted by  WrenWright on  Tue Oct 28 19:11 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 07:51 CST 2014
[RELATED]

I'm thinking that the hall sensor in my '83 240 DL (B23F) is on its way out. The ignition sometimes is spotty and the tach jumps around while I'm driving it. If so, I've got a known good sensor from an '88 240.

Is it possible to swap out the sensor, or must I swap out the whole distributor, or???





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swap '83 Hall Sensor for '88? [200][1983]
posted by  WrenWright  on Tue Oct 28 19:11 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.