Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

940 window regulator replacement bolt size 1992

posted by  Herb Goltz on  Tue Aug 12 16:26 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Hello All:

The driver's side window regulator on my '92 945T is nearing the end of it's service life-- it slows down significantly at the last 3" of downward travel-- if it's cold, it doesn't go all the way down no matter how long you hold the switch down.

I found a replacement regulator at the pick-and-pull (from a '93 965), but mine is installed with rivets. I will drill them out, but I am wondering what size and length bolts I should use for the job. I remember seeing a post with the details here, but I haven't been able to find it using the search feature.

Thanks!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

940 window regulator replacement bolt size 1992

posted by  Rule 308 on  Wed Aug 13 04:33 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 09:20 CST 2012
[RELATED]

6mmX1.0

Mark







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.