Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

122 Horn Button Washer/Insulator 120-130 1966

posted by  volvorine on  Tue Aug 12 07:08 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 7 16:07 CST 2009
[RELATED]

I've read through as many threads regarding the horn washer. I believe my horn problem is due to a worn out button washer or insulator. My problem is when I removed the horn button, I didn't see any washer. Where is this washer located? Does anyone have a picture of the washer/insulator and where it is located? Thanks.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

122 Horn Button Washer/Insulator 120-130 1966

posted by  walrus3 on  Tue Aug 12 10:54 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

It is located between two silver-plated disks under the horn ring. They are
held down by 3 c-rings over plastic bushings. When the foam rubber washer goes
flat the two silver plated disks touch and the horn blows all the time.
One of the disks is grounded and the other is insulated and makes contact with
the button on the end of the wire that goes up the steering column.
--
George Downs, Bartlesville, Heart of the USA!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.