Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2006 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

tailights 200 1991

posted by  don57 on  Thu Jul 24 00:08 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 7 10:38 CST 2014
[RELATED]

Good Morning! thought I'd install my replacement tailights on my 244 any advice on making this easy! thanks!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    tailights 200 1991

    posted by  boxvolvo on  Thu Jul 24 00:40 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 04:28 CST 2014
    [RELATED]

    Piece of cake - I replaced mine last summer, took about a half hour. And I'm old and slow.

    Make sure that the mating surfaces where the fixture meets the body are clean - all the old gasketing material has to be removed to insure a tight seal. Torque down to a nice tight fit, but don't force it - like all things plastic, the housing can crack.

    It's also a good time to clean the grounding points.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.