Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

fuel injector storage 200

posted by  yama on  Wed May 14 00:42 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

I have a few sets of fuel injectors left on intake manifolds still connected to the fuel rails. I would like to store them such that they don't go bad. I don't have a clue has to what is the best way to do this. I'm thinking of taking them off and maybe adding a drop of Stabil in each one.

Any recommendations???








  REPLY TO THIS MESSAGE    PRINT   SAVE 

fuel injector storage 200

posted by  Jorrell on  Fri May 16 16:29 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 27 03:00 CST 2012
[RELATED]

Yama,

I have purchased a number of new and rebuilt injectors over the years, some of them came bagged with a desiccant pack, others were vacuum sealed, and a few were oiled up very well.

In short, keep moisture away from them, the easiest method is probably to dry them out with brake cleaner, apply a light coat of oil to them, and then wrap them in oil cloth... then a zip lock bag. That is the method I have used for years, so far, no problems.

jorrell
--
92 245 250K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently taking names and kicking reputations!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.