Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

95 940 body

posted by  salemjames2000 on  Wed May 7 04:49 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 14 17:17 CST 2014
[RELATED]

i hit 2 deer in my 940 i have some leads on parts, but the are from a 850, and 740, was wondering if the hood, core support fenders, radiator,and ac codenser would fit my 940? any help?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    95 940 body

    posted by  rstarkie on  Wed May 7 09:25 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:14 CST 2014
    [RELATED]

    The sheetmetal parts (as well as headlights) from the 1991 and newer 740's will bolt right up.

    The hood, grill, headlight trim and the grill support is different on the 1990 740. If you have a donor car that can supply all of those parts you can swap them all out, but you can not mix them.

    The front fenders on the 1990 740's are the same as later years as well as your 940.

    Things are a bit different if your 940 has fog lights in the grill beside the headlights.

    Randy







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.