Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Location of washers 200 1985

I replaced the accessory mount bushings, and wound up with an extra flat washer. I know, I know, make drawings, but I screwed up. I have the Bentley manual, the Haynes manual, and the Chilton manual, but none of them show the schematics for bolting up either the air conditioning compressor, the power steering pump, or the alternator. This flat washer came from one of these, and if anyone has a clear picture showing the location of these washers, or a drawing, I sure would appreciate being able to see it.

Bill








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Location of washers 200 1985

    There is a flat washer on the long bolt on the Alt. Goes on the front side of the bolt.

    Hate it when you have hardware left over, or that extra hole with no hardware.

    Regards,

    Paul










    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Location of washers 200 1985

      The one on the front side of the alternator is in place. I think that this one goes on the power steering pump, but I can't see where it goes.

      Bill
      --
      Those who beat their swords into plowshares, will surely plow for those who did not.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.