Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1986 240DL Cruise Control 200 1986

posted by  rustydog on  Fri Mar 21 04:24 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 9 14:38 CST 2012
[RELATED]

Does anyone have a copy of the Volvo instructions for installing cruise control in a 1986 240DL? I'm looking in the local pick and pull yards for a cruise system, but need the instructions. Thanks.

Rustydog
240DL
160k








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1986 240DL Cruise Control 200 1986

    posted by  Blue Horse on  Sat Mar 22 01:06 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Apr 8 17:57 CST 2013
    [RELATED]

    I have removed the cruise control from my 89. It was not in operating condition, due to some disconnected vacuum lines and broken tees. If you are interested in the parts, I will sell them cheap. I haven't removed the stalk switch yet. It will probably be a little while (days---weeks) before I find a plain replacement. I don't have the installation instructions. Send me an email if you are interested in the parts.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1986 240DL Cruise Control 200 1986

    posted by  B.C. on  Fri Mar 21 20:25 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Mar 28 22:28 CST 2012
    [RELATED]

    I have the Volvo instructions. I will send you via Priority Mail all 17 multi-linguage pages. Email me direct for details.

    When you find a CC-equipped car, I think that all 240s 1986-1989 are the same. Take some photos before pulling it. Be sure to get the brass fitting off the intake manifold for vacuum supply, and the left side steering column stalk.

    Be careful when removing the three wires from the connecter to that stalk. Don't crack the plastic, don't break off the tabs on the female connectors.

    Good Luck,

    Bob

    :>)


    PS. I installed a JY system (bought on eBay) on my '88, it looks like the system on my '86 except the '88 installation is neater.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.