Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

radio suppression coil-intank pump - 700 1990

posted by  sherm on  Sat Mar 1 08:15 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 20:34 CST 2014
[RELATED]

I am replacing intank fuel pump on a Regina system, and found the inline copper radio supression coils to be all corroded. The replacement fcpgroton pump comes with a quick connect harness. What will happen if I snip off the two copper coils and run power supply direct to pump terminals? Has anyone had any radio interference? I remember removing the coils from the heater fan during replacment years ago, with no ill effect.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    radio suppression coil-intank pump - 700 1990

    posted by  sherm on  Sun Mar 23 13:46 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Oct 6 20:34 CST 2014
    [RELATED]

    I'll answer my own question by telling you that I ended up sniping off the coils because they didn't look so healthy after 18 yrs in the tank. Soldered wires onto new pump and there is absolutely no radio interference. I am still not sure why the Swedes wen to all this trouble. I found the same coils on the heater blower motor and did a lobatomy there too, with no ill effects.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.