Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

HELP!!! Swaybar mount nut broken 700

Hi all

Need some help, i am in the process of redoing the front end steering and suspension.
I was undoing the sway bar mount on the chasis rail and the welded nut inside the chasis broke, i cant see any way to get to it, need help on how i can fix this problem? is there any tricks?

thanks all








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    HELP!!! Swaybar mount nut broken 700

    Hi Neills,

    No flood of responses yet.

    Can you see the other side of that chassis member?
    maybe you can clear the busted bolt out of there with a cut off tool/dremel etc.
    and use a long bolt right through the member? Gotta see it.

    maybe some body shop guru or auto welder can weld in a new nut?

    Let us pray....

    BB








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      HELP!!! Swaybar mount nut broken 700

      You're probably going to have to grind the head off the bolt to get the clamp off. You'll probably never going to take if off again so just drive it to a muffler shop with one bolt in place and have them weld the other end.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.