Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2001

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Machine shop in DC area

Well, looks like it is time to replace the headgasket after 175K miles on 91 745 NA wagon. Would like to get head planed/refurbished while its off engine. Looking for suggestions on a good machine shop in Rockville/Gaithersburg/Silver Spring area? Any thoughts on cost for a head refurbishment in this area?
TIA
Dave
--
91 740 Wagon, NA, Regina, 175,000 miles








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Machine shop in DC area

    You might check on Turbobricks.com. Lots of good guys doing all kinds of machine work down there. Ask maybe Towerymt or MrBill, there should be threads in the performance section for Bill's mods now.

    Jim







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.