Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear Brake Line 444-544

Trying to find a new rear brake line for my '58 444. Any suggestions? Also, does anyone know the proper diameters and length of the rear brake line?

Thanks in advance,
--
Tony Scarola
1958 Volvo PV444 (44408)
http://www.scarolas.com/58VolvoPV444/








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Rear Brake Line 444-544

    If you mean the flexible line, they are the same as the rears for the 122 series (as are the fronts of the 444s). If the hard line, any good shop or parts store should be able to reproduce what you need, (though they may need to use your hardware "ends").


    Cheers!
    OK








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Rear Brake Line 444-544

      Sorry. Yes, I actually meant the hard line which runs from the master brake cylinder to the "t" union at the rear axle. It is much longer than anything available at the common auto parts stores from what I have found and I'd rather not join two lines together.

      If I could get the "proper" dimensions (inner, outer, length) I could bring these with me to a specialist shop to fabricate a new line.

      Thanks again!
      --
      Tony Scarola
      1958 Volvo PV444 (44408)
      http://www.scarolas.com/58VolvoPV444/








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Rear Brake Line 444-544

        Ah So! I see, next time I am under there (which won't be too long the way things have been going) I will try to get some measurements off mine. My 444 Parts manual lists all hard lines as 3/16" steel but does not give a specific length for the one in question.

        Cheers!
        OK








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Rear Brake Line 444-544

          Hello,

          Bulk 3/16 steel and stainless steel brake line is available.

          I have found a supplier who has 20' straight pieces at a ridiculously high price due to shipping costs or I stock 20' rolls of stainless brake line for $40.00 or a 25' roll of regular steel tubing for $30.00.

          You have to cut and flare yourself.
          --
          Eric
          Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
          Torrance, CA 90501







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.