Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<] [>>]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

REPLY TO THIS MESSAGE

SAVE

240 GLT clutch 200 1982

posted by 5 too many bricks on Fri Jun 22 15:23 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Sep 10 15:07 CST 2010

[RELATED]

Any one have a picture of what the connection between the clutch cable and the clutch arm should look like. Clutch cable broke at the pedal end. By the time I got it home, I think I lost a piece or two. Currently a rubber block over the head of the cable after it goes thru the hole in the clutch release arm. What am I missing.

REPLY TO THIS MESSAGE

SAVE

240 GLT clutch 200 1982

posted by Rhys on Fri Jun 22 19:31 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Tue Nov 20 10:22 CST 2012

[RELATED]

A round disc with a radial slot leading to a depressed center accepts the ball end of the cable, and the disc then sits on the rubber block which in turn acts on the lever. Perhaps the disc has dropped out.

REPLY TO THIS MESSAGE

SAVE

240 GLT clutch 200 1982

posted by 5 too many bricks on Sat Jun 23 04:11 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Sep 10 15:07 CST 2010

[RELATED]

That sounds like the missing piece. Thanks for the reply.
Bruce

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.