Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2011 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear seatbelt anchor holes 120-130

In the past, some had said that the early Amazons may not have had anchor holes for three-point safety belts for the backseat passengers.

Well, all my poking around inside my car today behind the headliner by the rear windshield found that there is not only one anchor hole but TWO! And my car is a 1963 sedan. Should I use the front or back mounting hole?

I plan to install 3-point belts there and either mount the retracting mechanism on the parcel shelf with a reinforcing plate below. Or mount it in the trunk and have the belt pass through a slit in the parcel shelf.

What have you all done in the backseat? (I mean as far installing seatbelts, nothing personal!)









  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    From: Miss Flourance Traore. 120-130

    From: Miss Flourance Traore.
    Email: flora1com@ubbi.com
    Abidjan Cote d' ivoire West Africa.

    Greetings in the name of the Almighty, and may his grace continue to assist
    you and I, as you open your heart in helping me out of this unbearable situation of my family disaster. Please give me this Godly help for our Almighty will reward you in abundant. It is my pleasure to contact you for a business venture which I intend to establish in your country, though I have not met with you before but I believe, one has to risk confiding in succeed sometimes in life. There is this huge amount of Million U.S dollars ($6,500,000.00) which my late
    Father kept with a Fiduciary Fund Holder here in Abidjan the Capital of
    Cote d’Ivoire before his death.

    Now I have decided to invest these money in your country or anywhere safe
    enough outside Africa for security and political reasons. I want you to help me claim and retrieve this fund from the Fiduciary Fund Holders and transfer it into your personal account in your country for investment purposes. I am Miss Flourance Traore, the Daugther of late Colonel Bakassa Traore who died on after he was badly tortured by the security agents of the present goverment of president Laurent Gbagbo of the Republic of Cote D\\\'Ivoire for honouring the invitation to a dinner by the French Ambassador with his two colleagues, after the dinner they were arrested by the security agent of the present regime and was accussed of being traitors to their motherland knowing the political problems between Cote d\\\'Ivoire and France.

    They were tortured and detained for several hours after they were released
    immediately he was rushed to the hospital where his private doctor battled
    to save his life but he died 4 days later on sunday 3 july 2005 for
    verification you can see for your self this website:
    http://news.bbc.co.uk/2/hi/africa/4649533.stm

    My father knowing he won,t survive called all of us by his dying bed and
    instructed us to leave the country to Ghana where we are presently as our
    country Cote d\\\'Ivoire (Ivory Coast) is no longer safe for us, Our Mother
    died 3 months later as a result of the heart attack she suffered during the
    news of the death of my father and I have to escape from Ghana now to Cote
    d’Ivoire in respect of this money and no one knows my whereabout here as I
    am in hiding place now at a Church with the help of one Pastor.

    If you can be of an assistance to me I will be pleased to offer to you 20%
    of the total fund for your assistance to me.

    I am wait your soonest response.

    Respectfully yours,
    Miss Flourance Traore.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Rear seatbelt anchor holes 120-130

    My '67 has the same threaded holes. I intend to use the hole that fits the thread from the bolt I pulled from a 240. Essentially, I intend to use the 240 pivot in its entirety...

    The lower belt anchors are easy. Even the center one bolts right in. I intend to weld or bolt a steel plate under the rear deck to give it a little more strength to hold down the ratchet mechanism. The ratchet mechanism will sit on top of the rear deck. I'm going to try and trim down the 240 cover to cover things up. I ran out of time last spring to do this and have too many other projects on the go right now but I will do it sometime this summer...

    Dale
    --
    Dale







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.