Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Trailing Arm Bushing Tool in Charlotte NC Area 200

Does anyone have a trailing arm bushing tool in the Charlotte NC area which they would be willing to rent or loan? Thanks!! Andy Russell








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Trailing Arm Bushing Tool in Charlotte NC Area 200

I made my own tool out of diferent sized pipes, washers and bolts from the hardware store - used a smaller pipe and bolt to push the bushing out of the biger diameter - just use a nut on a long bolt on top of some washers and crank away. cheap and easy
--
--- '59 544, '81 245, '77 Elky








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Trailing Arm Bushing Tool in Charlotte NC Area 200

You might want to check with Tom Baker ... Baker Automotive 315 Quincey Street Charlotte, North Carolina 28203(704) 333-1083. He's the guy I bought my 780 from and might be able to help you out. GREAT guy to deal with !!!

Brett
--
Brett Sutherland & the 1.5 million mile 122 CANADIAN --- WINDSOR, Nova Scotia the birthplace of HOCKEY www.ecvintagevolvo.com








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Trailing Arm Bushing Tool in Charlotte NC Area 200

Thanks...







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.