Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Widow not closing, macine gun noise at top position, 900 1992

Took off the door panel and found gear teeth worn off at the top of the crescent shped window riser gear. Is this part replaceable or do i have to replace the motor and riser as an assembly. The X arms that raise the window seem to have considerable play in them also, i can rock the window back and forth at least and inch. Just got the car a couple of days ago, fixing it up for resale in a little while, only 101k on it. Love my 91 745t w/252k on it and just cant part with my baby..... Tom Wasney 27940aholic








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Widow not closing, macine gun noise at top position, 900 1992

Typically it is a complete assembly.

Mark








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Widow not closing, macine gun noise at top position, 900 1992

The existing window motor is pop riveted in, once i drill out the rivets can i reinstall another assembly with bolts and nuts in place of the rivets. I have a pop rivet gun but don't think they will anchor it securely enough. Tom 27940aholic







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.