Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 Carbon Filter 200 1978

Hi All,

I just restored tne engine compartment of my 242GT but can't figure out where all three lines to the carbon filter go (of course I didn't take notes).

Two lines connect to the top and one to the bottom. On the top a small one comes from the gas tank and I have the other top one routed to the intake manifold. The larger line on the bottom is the one I'm confused about. I'm thinking it should go to the manifold instead of the other one, but then where does the other one go?

All the manuals I've checked are sketchy about this.

Thanks

Les
Vancouver, WA








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 Carbon Filter 200 1978

Hi Les,

Is this the same sketchy stuff you've been looking at? This makes it look like the bottom one hangs down into nowhere...


--
Art Benstein near Baltimore

Before I got married, I had six theories about bringing up children.
Now I have six children and no theories. (John Wilmot)








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 Carbon Filter 200 1978

Hi Art,

I did find that one. So I've decided to let it hang. It does have the plastic tube inserted, but it's not as long.

Got it tuned up and on the road this afternoon

Thanks for the response!

Les







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.