Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Bracket that holds return spring 120-130

posted by  someone claiming to be 122s on  Sun Feb 26 16:44 CST 2006 [RELATED]

Where can I get one of these brackets that hold the return spring for hte clutch fork or can I just make one?








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Bracket that holds return spring 120-130

    posted by  someone claiming to be 122s on  Tue Feb 28 05:39 CST 2006 [RELATED]

    Do you have the specific deminsions for the bracket that holds the spring and connects to teh slave cyl








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Bracket that holds return spring 120-130

      posted by  undrtw on  Wed Mar 1 13:32 CST 2006
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Sat Apr 3 17:37 CST 2010
      [RELATED]

      slave-bracket-drawing.jpg

      comparison.jpg

      The bracket from my '64 is about 1/16inch thick. I drew this up from the one i had. It should be close enough to get you there. I don't remember which way it mounts exactly, it's been a few months since i pulled it.

      much respect,
      curtis m. white








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Bracket that holds return spring 120-130

    posted by  walrus3 on  Mon Feb 27 03:26 CST 2006
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Dec 2 14:20 CST 2013
    [RELATED]

    Sure you can. It is made of about 16 gauge steel and sort of "L" shaped
    with 2 holes matching the slave cylinder mounting holes and one for the
    spring. Need to get the hole for the spring fairly close to the edge so
    you can get the spring through it.
    --
    George Downs Bartlesville, Heart of the USA!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.