Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2013 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Corona wheels fit on '93 240 w/ABS? 200

So I've been mostly AWOL from here for quite a while now....apologies, but working three jobs doesn't help with free time. Anyways, my question is basically my title: Will Corona 25-spoke rims fit a '93 wagon with ABS? I'm selling my rims and the potential buyer is wondering this. I don't see why it would be a problem, but thought I'd ask here first. Thanks for any help

Nate Gundy
--
'86 240DL sedan, 260K miles, M46, K cam, 25/23mm sways, 260 front and wagon rear springs; http://valvespringcompressor.weblogs.us/








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    THEY DO FIT 200

    So we took a small gamble and the potential buyer drove an hour to meet me and I quickly took one of the wheels off his '93 240 wagon for the test....duh duh duh, they fit! So for future reference, corona wheels truly do fit all years of 240's, though some will need the locating pins removed. So do not let a tire tech tell you they won't fit over any ABS crap, because the ABS stuff is on the INSIDE of the hub, creating no wheel clearance issues, and the calipers fit fine inside the wheel. Thanks for the help everyone,

    Nate Gundy








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      THEY DO FIT 200

      Too late to be of any help - but yeah, there's noting ABS related that a tire would have to clear. If anything, there's just one less brake line, but they aren't really near the tire.
      --
      '63 PV544 rat rod, '93 Classic #1141 245 (now w/16V turbo)








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Corona wheels fit on '93 240 w/ABS? 200

    I still have them on my '92 with ABS...no problems...
    --
    '92 244GL silver-metallic, 152k, Enem V15 cam, Bilstein HDs, IPD sways, upper+lower and Cherry-Turbo strut braces, 240 OEM rear wing, 15' Dracos, SS lines, E-codes w/side repeaters, Euro cowl covers paint-matched, Magnaflow 2.5' SS exhaust, Unitek header







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.