Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 240 Power Mirrors on 86-92? 200

Has anyone installed 1993 240 power mirrors on their 86-92 240? I have a pair and was wondering if it works. ty








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    1993 240 Power Mirrors on 86-92? 200

    Your best bet is to find a donor car in the yard and remove the system consisting of the wiring harness, switches and mirrors. Don't forget the inside cover plates; becareful when you pry so you don't break the tabs. I have noticed that people usually don't install the turbo mirrors. I have installed a set in my '88 244GL and they dropped right in except for drilling custom holes by the e-brake for the power switches. The installation is not difficult and I think they looks sharp!

    BTW: Don't forget the outside cover plates for the turbo mirrors.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1993 240 Power Mirrors on 86-92? 200

    Yes, of course it works if you got the harnesses, switches, relay and trim bits for the mirror installation. It is a heated mirror package too so there is a dash switch for that as well.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.