Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Boosting the Boost 700 1986

uid 55's pic
posted by  john sargent on  Mon Dec 29 05:40 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

I didn't read that part of the IPD newsletter, but I will guarantee the factory boost setting for your car is not 10.5 psi. The factory manual says to adjust the length of the wastegate actuator rod to set the max pressure from 6.5-7.7 psi.

The wastegate is properly adjusted on your car. If you want more boost pressure, make or buy a G valve. Go to http://Dawesdevices.com. You can search this site under G valve, or go to turbobricks.com
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Boosting the Boost [700][1986]
posted by  someone claiming to be steve86turbo  on Mon Dec 29 04:47 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.