Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2009 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Dual circuit brakes 120-130

posted by  justin on  Mon Feb 3 12:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 8 10:09 CST 2009
[RELATED]

I know this isn't your goal and it's already been discussed, but I *just* finished putting a 1800E/ES master cylinder and the necessary plumbing into my '66 122. The 140 master cylinders do not have a stop to limit the backwards movement of the ram, which would allow it to fall out into the cabin! I used an adaptor offered by ipd to mount the horizontal bolts to the existing vertical mount on the pedal box. I would have just drilled new holes but the pedal box is too narrow for both to fit without doing something silly like moving the pedal and master cylinder over an inch or so.

I thought about the dual diagnal system that's in my 180 and 140, but that seemed like a lot of work. Maybe later, though.

Unemployment is great. I can finally get these projects done that have been lagging for months now. Then again, I don't have a job. Maybe not that great.

Busy picture but you get the idea.


--
Justin 70 1800E, 66 122E, 71 145S
Read vclassics!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Dual circuit brakes [120-130]
posted by  Oliver  on Thu Jan 30 06:20 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.