Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

122 / 544 / 210 Heater Blower Motor - Permanent Fix / Repair 120-130

posted by  Amazonphil on  Thu May 16 16:11 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Delrin might work good there. I made throttle shaft bushings and the stuff fares so well without need for lube. I think it was Delrin,
an almost black material I think, impregnated with graphite or similar.. it turns like cutting butter with a hot knife , on a lathe.

I think early 240's had bushings and then they went to bearings and those are horrible to get to. the one in my 740 keeps filling with water. I got a new cheapo one from rock auto and it's similar 1 wire, but the flange is different so I'm trying to get it to seal and not fill again with water. the one in my 122 is an OEM electrolux ;-)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 122 / 544 / 210 Heater Blower Motor - Permanent Fix / Repair [120-130]
posted by  LowellBlvd  on Mon Mar 14 14:37 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.