Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Coolant Sensor Level - 2 Pole Connector 900

posted by  Metallo on  Wed May 25 20:08 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 29 21:03 CST 2012
[RELATED]

Hi Dave, All,

Actually, I got to the same P/N as you did, but I am not so sure it fits, due to its shape not being the same as the male.

However, if you go to Dave's Volvo Page, you can find the same and the one with pigtails:

https://www.prancingmoose.com/blackvinyl.html#2polefemalevolvo

Right under the connector housing, you can see the FEMALE 2-Pole Plug with Pigtails.

I could try that, easier because I do not need to search for the female crimp connectors, but do you think the wires are big enough?
In theory they should, at the end it is just a sensor, but I think the whole wiring suggested in the FAQs is 18 gauge.

Anyways, I will have to start somewhere, as Spook said, I have plenty of work to do. :)

Thank you!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Coolant Sensor Level - 2 Pole Connector [900]
posted by  Metallo  on Tue May 24 19:49 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.