Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2012 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can you identify this vacuum component? 1800

posted by  james_a_sousa on  Sat Feb 27 09:36 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

Two things that you can try tu use a valve with smaller barbs -

1, put a small section of the correct hose on first, then attach the larger hose. Find a hose the proper thickness. I always keep any hoses that I come across and some hoses from appliances are quite thin.

2. Wrap the barbs with electrical tape to get the proper diameter than attach the hose. Clamp the hose tight and check it once and a while - vacuum is a small but irrestable force and may cause the tape to slowly move.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can you identify this vacuum component? [1800]
posted by  Whale subscriber  on Sun Feb 21 22:41 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.