Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2018 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need rotary (Sanden) A/C mounting bracket 1800 1970

posted by  Volvo From Heck on  Wed Dec 31 18:00 CST 1969
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

When you ask--will it work with a Sanden compressor?  do you mean will one just bolt on?   --  no, these are original mounts made for the York compressor as there was no such thing as Sanden "in the day".    BUT -- they are very sturdy & simple in construction and the hard part of fitting to the block is already engineered and accomplished.  To mount the Sanden 4 "ears" would need to be welded and drilled.  Could be from scratch - or cut from a steel bracket already made for a Sanden.  thanks for the inquiry,  Dave





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need A/C [1800][1970]
posted by  Dave B subscriber  on Fri May 31 15:46 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.