Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2005 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cracked exhaust manifold on a '73 B20F 1800 1973

posted by  Volvo From Heck on  Sun Jan 13 15:53 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

James asked -- "why a manifold for a carbonated engine won't work." Maybe because of the bubbles? :-) You can cut the carbureted section of a combo intake/exhaust off and use the exhaust section. The flange thickness will be different so you can have the thicker one milled -- or -- I weld a 1/2 ring and full washer to make custom "stepped" washers. ALSO--need to add this--there's a locating pin set into the FI cylinder head -- I can't recall if that effects the intake or the exhaust. -- Dave





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cracked exhaust manifold on a '73 B20F [1800][1973]
posted by  fran krause  on Fri Jan 4 00:20 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.