Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ensure you rack..itself......is "''secured'' and not sliding back forth on the crossmember 200 1991

posted by  1pocket on  Sat Mar 26 17:04 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

inner tie rods are threaded into the ends of the rack. once threaded they simply do not move. take a look at a picture of one. the male rack end threads into the female inner rod. what wears out on these is the ball and socket joint just outward of the bond between the inner rod and the rack end. if the outer tie rod ends are freed from the knee assembly you can test the inner rods by simply pulling the outer tie rod end in and out feeling for play.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steering wheel off center, left then right, loose. [200][1991]
posted by  NewMexico240 subscriber  on Thu Mar 24 15:39 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.