Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Is the front drive shaft flange identical to the rear? 200 1991

posted by  vacuumhead on  Wed Apr 22 07:20 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:49 CST 2014
[RELATED]

Well I guess I'm going to have to admit that I could have been at least in part responsible for the flange damage on the 89 240. Yes I did use a hammer to tap out the caps and perhaps I wasn't careful applying pressure using the vice. But the flange on the 91 was already damaged before my incompetent paws got a hold of it. Also replacing the bolts is a good suggestion. Can I just match them up in size and grade or should I order OEM.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is the front drive shaft flange identical to the rear? [200][1991]
posted by  vacuumhead  on Tue Apr 21 19:32 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.