Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2022

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

"E' clip specs (size) for shift linkage on the AW's??

posted by  Volvo From Heck on  Fri Apr 25 21:22 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

I just replaced these parts on a client's '92 245. I had replaced his shift housing -- didn't like the condition of the pin clip--and lost the "E" clip for the connection at the transmission. A local independent parts store came up with an "E" clip - it worked but I wasn't confident it would stay so I ordered new pieces from Volvo. The clip that secures the pin is similar to the clips on window regulators--a stamped spring steel clip -- called a "lock brace" by Volvo -- part # 989037-7 @ $2.97. The transmission end of the shift linkage is an "E" clip--called an "E-circlip" by Volvo -- part # 951669-1 @ $2.75.
The "E" clip from Volvo had a slightly different shape than the auto parts store clip and definitely fit better. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New &quot;E' clip specs (size) for shift linkage on the AW's??
posted by  rstarkie subscriber  on Fri Apr 25 18:03 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.