Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

"E' clip specs (size) for shift linkage on the AW's??

posted by  rstarkie on  Fri Apr 25 19:17 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

Thanks for you reply Dan.

I am pretty sure the clip and the pin must be gone. Initially I had not thought about the pin being lost but as I continued my search through another small parts cabinet I realized the pin had to be missing as well to provide the complete disconnect that he described.

However, in some of the best luck I have had in some time I came across a pin and two clips I managed to zip into a sandwich bag during a parting out process.

I replaced the bushings on the linkage on his car a month ago and the clip and pin were cleaned up. The clip snapped into place nicely so I have to wonder what happened that the clip obviously came out?

Randy





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New &quot;E' clip specs (size) for shift linkage on the AW's??
posted by  rstarkie subscriber  on Fri Apr 25 18:03 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.