Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing rear wheel seals and bearings 200 1990

posted by  dcooledge on  Tue Mar 4 15:44 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 9 07:48 CST 2014
[RELATED]

I just did this job, in addition to the center driveshaft bearing, as I misdiagnosed what I thought was a bad wheel bearing. The hardest part of the job was putting the parking brakes back together. The springs are very tight.

I gave up long ago pressing out bearings myself. I take them to a machine shop and they're out and in in a few hours. I paid $45 for both wheel bearings. I thought the race would be hard to pull out, like on the fronts, but they both came out without any effort.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing rear wheel seals and bearings [200][1990]
posted by  Jac912  on Wed Feb 26 06:13 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.