Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2023 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 M46 clutch, parts and pieces, 200 1986

posted by  BonesandFeathers on  Tue Mar 5 03:09 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 4 00:36 CST 2014
[RELATED]

No. The retaining spring I am speaking of is inside the bell housing, at the far end of the lever where the lever attaches to the ball on the interior.
i will post pictures tomorrow, as i have finally secured a cloud site (free from Amazon)."
I still see no differences in the , clutch disk, pressure plate or release bearing. Doesn't mean there isn't one.
But for now w/o being able to secure the clutch fork inside the bell housing I'm not going anywhere except to junk yards to fins an M 45 or 46
I will research, more into the usage of the 82 Sachs clutch parts with the 86 Sachs clutch parts.
Thanks as always
Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 M46 clutch, parts and pieces, [200][1986]
posted by  BonesandFeathers subscriber  on Mon Mar 4 15:15 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.