Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Balderdash Alert! 200

uid 18083's pic
posted by  lucid on  Sun Oct 31 01:38 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

"That always happens with screw clamps on fuel injection systems!!!"

"Always use crimp clamps on fuel injection hose."

Where do you come up with these off-the-wall pontifications?

Screw type hose clamps have been universally used on on fuel systems (including FI) for years. The smooth-backed type are preferred of course, like the screw type clamps Volvo has always used.

Oetiker clamps will do no harm, but except for racing or flying applications, they are hardly intended for the average DIY motorist.


--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New FI fuel line warning, aftermarket [200]
posted by  Jorrell  on Sat Oct 30 15:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.