Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Lights stay on 200 1993

posted by  fpeck1948 on  Tue Oct 26 05:31 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 27 08:46 CST 2013
[RELATED]

Tried moving the car again and found out that if I push the brake pedal hard, it will release the shifter and I also found out that I am blowing #16 8A fuze.

I had been having trouble with the right rear side lights before and thought I had the problem fixed by bending the prongs on the brake/tail light plug to make better contact.

Maybe the circuit board on the right side is bad. All new lights came from FPC Groton and just maybe I got a bad right side circuit board.

Could a onside circuits board be causing my lighting issue?

Art....you are a prince and we are lucky to have you on here.

Thanks a million,
Frank






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Lights stay on [200][1993]
posted by  fpeck1948 subscriber  on Tue Oct 26 03:36 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.