Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS Light and symptoms 200 1991

posted by  dinomartino on  Thu Jan 28 14:45 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

The 3-1-1 code is "vehicle speed sensor missing". The speed sensor sends a signal to the speedometer and also to the ABS computer. So, either the sensor head has failed or the wiring for it has a fault. It is mounted on the rear face of the differential housing (above the fill plug).

If you have Bentley manual, see section 460-4.

John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ABS Light and symptoms [200][1991]
posted by  ACVOLVO subscriber  on Thu Jan 28 14:15 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.