Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2009 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 front seal 140-160

posted by  Volvo From Heck on  Mon Jul 27 12:33 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

My tools of choice for the transmission bolts is a short length of 3/8 hex bar (cut from an allen wrench) along with a 3/8 drive 3/8" universal socket. The loose length of bar can be inserted into the bolt head with a good length box end wrench on it. Crack the bolts loose (watch your knuckles). Unscrew with the universal socket and extension. Use the box wrench again to tighten these bolts. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M41 front seal [140-160]
posted by  cef2lion  on Mon Jul 27 09:10 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.