Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

need source for front brake 'dust guards' 200 1989

posted by  michelg on  Tue Aug 28 15:04 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Nov 23 05:14 CST 2007
[RELATED]

Try these part numbers:

1272102-3 protector plate (circular ring, about 6" diameter), usd$27 from Tasca, I paid usd$32 each from FCP Groton.

1272469-6 splash shield (slightly larger than the brake rotor), usd$24 from Tasca, I paid usd$28 from FCP Groton.

I made a point of stripping the factory finish immediately, and painting them with two coats of POR-15.

Hope this helps,

Michel

1979 242DL
1988 244DL





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New need source for front brake 'dust guards' [200][1989]
posted by  twoOldVolvos  on Tue Aug 28 14:09 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.