Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2022 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

code 232 in #2 socket 700

posted by  igtc on  Sat Apr 29 13:21 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 30 14:49 CST 2007
[RELATED]

Mine is still doing this after changing the head gasket, I have check again and again for vacuumm leaks. However, I still believe this is my problem.

Now keep in mind, I did replace my o2 sensor, but it was not the correct one. Also, I replaced everything that goes along with it:

Plugs, wires, rotor, dis. cap, cleaned TB, fuel filter, oil & filter, all belt (timing, accessories), flame trap, and water pump, gaskets, and hoses. I really believe I possibly did miss some vac hose, but can't find it.

I think the vac lines may be your problem also, especially if you replaced some near or around any vac hoses.

Kevin

1990 740 GL Rex 216
1997 960 126K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New code 232 in #2 socket [700]
posted by  molobo  on Mon Apr 17 02:03 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.