Volvo PERFORMANCE Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2010

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PV544 front suspension mods

posted by  mgdoc on  Mon Aug 16 05:20 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 21 01:18 CST 2010
[RELATED]

I'm getting ready to start a GM V6 with a T5 gearbox project on my 59 PV544. Is there any decent / easy to get hold of, front suspensions with rack & pinion steering that will possibly bolt on? I'm thinking of rack & pinion to get around that huge Volvo steering column. I'm not too concerned if I do have to cut and / or weld. I had thought of using a suspension from an MGB but, it's too narrow and I don't want to cut and weld on that one. Any ideas???








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    PV544 front suspension mods

    posted by  davidjudd2 on  Thu Aug 19 08:09 CST 2010
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Apr 30 18:19 CST 2014
    [RELATED]

    All the hot rodders use the Mustang 2 front end, lots of parts available aftermarket. Don't know anything fitment wise, but it's worth a look.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.