1991 740
|
|
| POSTED BY |
| chuffsy[SHOW ALL] |
| DATE |
| Thu, Sep 3rd 2009 |
| HTML |
|
| CITY |
| Miami |
| STATE |
| FL |
| COUNTRY |
| US |
| NOTE |
| To remove the cam seal I used two DRY WALL screws. I tapped them in with a hammer just enough so I could use a screw driver to get them in further. You dont have to go in a lot just so you can hold them and pull the seal out. To give you an idea the tip of the screws were not protruding out of the other side. |
|
THUMBS
|
|
|
|
©Jarrod Stenberg 1997-2022. All material except where indicated.
All participants agree to these terms.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.
