No key - remove steering lock with saw (1 of 3)
|
|
| POSTED BY |
| jfh0jfh[SHOW ALL] |
| DATE |
| Tue, Jan 20th 2015 |
| HTML |
|
| CITY |
| E of Columbus |
| STATE |
| OH |
| COUNTRY |
| US |
| NOTE |
| This car had no key. Needed to move it around - not easy with front wheels turned.
1. Remove gauge cluster, plastic around steering wheel, and steering wheel itself
2. Remove wiper stalk and pull other wires out of the way.
3. Insert reciprocating saw blade above lock housing and cut between ignition tumbler and steering column
4. Prise up with pry bar to break housing
5. Remove leftover piece of locking bar from column side
6. Remove ignition tumbler, start car with screwdriver. |
|
THUMBS
|
|
|
|
©Jarrod Stenberg 1997-2022. All material except where indicated.
All participants agree to these terms.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.
