Volvo AWD 400 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 400 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

bhp 400 1990

uid 35's pic
posted by  arno on  Mon Dec 31 07:01 CST 2001
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 8 01:10 CST 2000
[RELATED]

> is it possible to fit a dump valve to a 440 turbo and where can i get it from??

Sure you could, but why would you? It's running a pretty low pressure and a blowoff/dumpvalve is really only required if you run pretty high pressures.

AFAIK does the LH2.2 also use an air-mass meter, so you would still have to feed the air you vent back into the system.

Demon Tweeks in the UK probably sells them and you could rip out the external compressor bypass valve on the garett turbo and replace it with a blowoff. But it's not going to bring you much (if anything) at these low pressures.

Go ahead if you want to put one in, but IMHO it's a waste of money.

Bye, Arno.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New bhp [400][1990]
posted by  someone claiming to be jason  on Fri Dec 28 22:09 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.