Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing CV joint or boot 850 1997

I did it myself on the passenger side...not too hard, but you do have the remove the hub nut and pull the brake caliper, and remove lower BJ nuts and then pull the spindle hub off the drive shaft. Shafts can then be removed (need to remove also the brcket which supports the pass driveshaft. Haynes manual has a decent description on this as well as how to remove the circlip and replace the boot. If you are a decent DIY mechanic it will take you about a half day, maybe a little longer.

If you go with a replacement unit, make sure you get one of decent quality, not just a cheap one...I know the volvo ones are pretty expensive, that is why I did just the boot...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing CV joint or boot [850][1997]
posted by  RdL  on Thu Apr 13 13:14 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.