Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2022 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bent rod on #3 cylinder S70 1998

posted by  Muttley on  Thu Feb 24 17:20 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I recently bought a 1998 S70 T5 manual trans. that had a bent rod on the #3 cylinder due to filling with fuel or oil ( not sure ). Has anyone else heard of this problem and if so, what is the cause and proper fix to ensure it will not happen again. The car also runs rough for a few seconds when it has been started after not running for a few days... Any information would be much appreciated!

Please contact me at Adam@digitalvelocity.com if you have heard of or are familiar with this problem






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bent rod on #3 cylinder [S70][1998]
posted by  Muttley  on Thu Feb 24 17:20 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.