Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Secondary air relay voltage question V70-XC70 1998

posted by  pgattuso on  Fri Jan 30 03:51 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Secondary air relay voltage issue. I am getting no vacuum on the other side of the sec air relay(located on top of radiator) . I have 6.4volt at the plug. When I jump 12 volts to the relay it opens and supplies vac. Is my ECM supplying the voltage, is there a driver in between. I suspect the voltage is dropping further when plugged in. When I jump the vac line I still have no suction from air pump.

This is a result of of obd2 codes 0108(manifold absolute pressure/Barometric press. circuit high input )and 0410 (Secondary air injection sys malfunction) I don't know weather the 2 are related. Is there a map sensor and if so where is it located ?
Thanks in advance
Paul







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.