Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Special tools needed for changing front struts? 850 1997

posted by  RDEBEAR on  Fri Jan 23 01:10 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need to change my front strut and spring seat. I have the spring compressor. The Haynes manual notes using three Volvo tools to(1) unscrew the strut mounting nut while(2) holding the protruding portion of the piston rod and finally (3) removing the shock absrorber retaining nut. Has anyone done this job on their own? What about these 3 tools...do I have to purchase them, if so from where, or can I use some substitite tool? Last question...the Haynes noted to use 3 new nuts when taking off the strut upper mount and 2 new nuts when removing the bolts securing the suspension strut to the steering knuckle....is this necessary or can I re-use the old nuts? Thanks...as always...in advance!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Special tools needed for changing front struts? [850][1997]
posted by  RDEBEAR  on Fri Jan 23 01:10 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.